详解linux pwm驱动编写
(编辑：jimmy 日期: 2024/11/17 浏览：3 次 )
pwm方波可以用来控制很多的设备，比如它可以被用来控制电机。简单来说，就是单位时间内的方波越多，那么电机的转速就会越快；反之就越慢。通过这个特性，soc就可以轻松地利用pwm对外设进行自动控制。所以，今天的主题就是pwm驱动。
1、驱动目录
drivers/pwm
2、查看对应目录下的Kconfig
config PWM_SAMSUNG tristate "Samsung PWM support" depends on PLAT_SAMSUNG || ARCH_EXYNOS help Generic PWM framework driver for Samsung. To compile this driver as a module, choose M here: the module will be called pwm-samsung.
3、确认PWM_SAMSUNG只依赖于自己之外，继续看Makefile
obj-$(CONFIG_PWM) += core.o obj-$(CONFIG_PWM_SAMSUNG) += pwm-samsung.o
4、根据Makefile查阅pwm-samsung.c文件，结构比较清楚
static struct platform_driver pwm_samsung_driver = {
.driver = {
.name = "samsung-pwm",
.pm = &pwm_samsung_pm_ops,
.of_match_table = of_match_ptr(samsung_pwm_matches),
},
.probe = pwm_samsung_probe,
.remove = pwm_samsung_remove,
};
module_platform_driver(pwm_samsung_driver);
5、soc设备大多数是platform设备，继续寻找probe函数中的有用信息
ret = pwmchip_add(&chip->chip);
if (ret < 0) {
dev_err(dev, "failed to register PWM chip\n");
clk_disable_unprepare(chip->base_clk);
return ret;
}
6、找到注册函数后，接续看看函数接口点在什么地方
static const struct pwm_ops pwm_samsung_ops = {
.request = pwm_samsung_request,
.free = pwm_samsung_free,
.enable = pwm_samsung_enable,
.disable = pwm_samsung_disable,
.config = pwm_samsung_config,
.set_polarity = pwm_samsung_set_polarity,
.owner = THIS_MODULE,
};
7、pwm设备没有中断函数，一般是立马生效，除此之外，代码中还是有设备树的内容，可以看看
static const struct of_device_id samsung_pwm_matches[] = {
{ .compatible = "samsung,s3c2410-pwm", .data = &s3c24xx_variant },
{ .compatible = "samsung,s3c6400-pwm", .data = &s3c64xx_variant },
{ .compatible = "samsung,s5p6440-pwm", .data = &s5p64x0_variant },
{ .compatible = "samsung,s5pc100-pwm", .data = &s5pc100_variant },
{ .compatible = "samsung,exynos4210-pwm", .data = &s5p64x0_variant },
{},
};
MODULE_DEVICE_TABLE(of, samsung_pwm_matches);
static int pwm_samsung_parse_dt(struct samsung_pwm_chip *chip)
{
struct device_node *np = chip->chip.dev->of_node;
const struct of_device_id *match;
struct property *prop;
const __be32 *cur;
u32 val;
match = of_match_node(samsung_pwm_matches, np);
if (!match)
return -ENODEV;
memcpy(&chip->variant, match->data, sizeof(chip->variant));
of_property_for_each_u32(np, "samsung,pwm-outputs", prop, cur, val) {
if (val >= SAMSUNG_PWM_NUM) {
dev_err(chip->chip.dev,
"%s: invalid channel index in samsung,pwm-outputs property\n",
__func__);
continue;
}
chip->variant.output_mask |= BIT(val);
}
return 0;
}
以上就是本文的全部内容，希望对大家的学习有所帮助，也希望大家多多支持。
下一篇：Docker学习笔记之Weave实现跨主机容器互联